Connect USB cable to computer, and hold UP & REVERB foot switches to turn on TRIDENT, then you can enter to DFU (Device Firmware Update) mode to do firmware update. For more details, please visit product page to check the firmware update guide and download the newest firmware & Trident™ edit software.
(1)Firstly, make sure the TRIDENT and the connected amplifier (monitors or FRFR speakers) are turned off. Set the MASTER VOL to its’ minimum value. Connect your guitar to INPUT, and connect the related amplifiers (or monitors, FRFR speakers) to OUTPUT1 & OUTPUT2 or DI OUT1 & DI OUT2.
(2)Connect the including adaptor ACD-006 to the DC9V jack, and press the POWER button. And turn on the related amplifiers.
將機器附的變壓器ACD-006A接到DC9V接口,並按下POWER鍵開機。 此時將連接的音箱開機。
(3)Adjust the MASTER VOL pot to the desired position. (maybe less than the 50%)
Warning!! In order to offer you the best dynamic range of USB Streaming, the TRIDENT doesn’t attenuate the PC’s system playback volume. When using the TRIDENT as a USB audio interface, remember to adjust your PC’s playback volume from the “minimum” to the desired volume. Take care of your ears.
(4)Set OUTPUT MODE: Press the SELECT & PARAM encoders to enter GLOBAL SETTING, then short press the SELECT encoder to access OUTPUT MODE. Now, rotate the SELECT encoder to choose your desired output mode, then press SELECT encoder to save the output mode. (Here we will choose "STUDIO DIRECT".)
*The CAB block will be engaged under STUDIO DIRECT mode, others will disengage the CAB block.
* STUDIO DIRECT offers a line signal with CAB(IR). AMP FRONT offers an instrument signal without CAB(IR). AMP REAR offers a line signal without CAB(IR).
註記: CAB 模塊在『STUDIO DIRECT』模式下會被開啟,其他模式下會關閉CAB模塊。
註記: 『STUDIO DIRECT』提供 帶有箱體模擬(IR)的 LINE SIGNAL。 『AMP FRONT』提供不帶箱體模擬(IR)的 INSTRUMENT SIGNAL。 『AMP REAR』提供不帶箱體模擬(IR)的 LINE SIGNAL。
3. Start tweaking & playing: Once you boot-up the TRIDENT, it will be in PRESET MODE.
調節與彈奏: 開啟TRIDENT,默認進入『PRESET』模式。
(1)Press the UP / DOWN foot switch to choose the target preset group, in the meantime, the group digit (01~32) will flash. Then press either the A or B or C foot switches to choose the desired patch. (For example, 01-A)
(2)Under PRESET MODE, you can also rotate the SELECT knob to select a patch.
在『PRESET』模式下,你也可以通過旋轉『SELECT』編碼器來選擇預設。
(3)The TRIDENT includes 96 factory presets, and 96 user slots. Under PRESET MODE, short press the SELECT knob can call the FACTORY preset, and press the SELECT knob again to go back to the user slot. All the FACTORY presets were made by professional musicians and session players, it’s a good reference for the tone tweaking.
(7)Adjust the related knobs for the target effect block, engage / disengage the blocks for your own preset.
調節對應效果模塊的旋鈕,以及踩釘來開啟/關閉該模塊在預設中的狀態。
For deeper tone adjustments, you can press the PARAM encoder to enter EDIT MODE, in the meantime you can rotate the PARAM knob to choose a target block (which will be upper), then press the PARAM knob to enter the block. Under the related block, each page has 4 parameters, you can move to the target parameter by pressing NR / AMP / CAB / EQ buttons.